GAS330 Cooled Infrared Module
320x256 30μM MWIR Cooled Optical Gas Imaging Camera For Visualizing
Gas Leaks
Product Description
Optical Gas Imaging (OGI) is an innovative thermal imaging
technology that utilizes high sensitivity infrared cameras for
detecting minute fugitive emissions of industrial gases.
GAS330 is a 320x256 / 30µm Cooled Optical Gas Imaging Camera. Its
high sensitivity is suitable for detection scene with low gas
concentration and slow gas flow rate. Inspectors can find the gas
that pollutes the environment or is harmful to personnel assets,
and timely avoid profitable gas loss.
GST IR detectors have been widely used in thermography, security &
surveillance, personal vision, automotive and consumer infrared
products. The volume production capability of GST enables it to
meet the growing demand from all existing and emerging markets.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
Product Specifications
| Model | GAS330 |
| IR Detector Performance |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
Industrial Applications
The GAS330 gas leak detection thermal imaging camera is used for
visiualizing the invisible VOCs (volatile organic compounds) and
detecting gas leakage such as: Methane, Ethane, Propane, Butane,
Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene,
Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene
etc.
Exhibitions
FAQs
1. Advantages of Optical Gas Imaging
Time-saving & Efficient: support large-scale real-time detection,
rapid leak location, no need for interrupting production.
Long Range Detection: away from dangerous and complex areas,
non-contact non-destructive testing, without additional radiation
source
Easy to Analyze: intuitive imaging, instant storage, convenient
analysis
Multi-function Inspection: a variety of gases can be detected, with
excellent remote temperature measurement function
2．Working Principle of Optical Gas Imaging
Optical gas imaging is a kind of infrared technology that could see
invisible industrial gases.
After absorbing infrared radiation at specific wavelengths,
infrared radiation difference will cause between the gas and the
background.
The gas leak detection infrared detector with built-in narrowband
filter only receives the infrared band near the gas infrared
absorption peak, and can convert the gas into visible infrared
images through the radiation difference between the gas and the
background.
