GAS330 Cooled Infrared Module
OGI Optical Gas Imaging Camera With RS422 Communication
Product Description
Optical Gas Imaging (OGI) is an innovative thermal imaging
technology that utilizes high sensitivity infrared cameras for
detecting minute fugitive emissions of industrial gases.
GAS330 Cooled Optical Gas Imaging Camera can detect gas leaks that
are hazardous for human health and the environment by visualizing
them. This thermal camera module has a cooled infrared detector, a
resolution of 320x256, a piexl size at 30µm and a spectral range of
3.2~3.5μm.
By using GAS330 thermal camera module, non-contact detection is
achieved so that the safety of inspectors can be ensured, improving
the quality and efficiency with cost saving.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
Product Specifications
| Model | GAS330 |
| IR Detector Performance |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
Industrial Applications
The GAS330 gas leak detection thermal imaging camera is used for
visiualizing the invisible VOCs (volatile organic compounds) and
detecting gas leakage such as: Methane, Ethane, Propane, Butane,
Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene,
Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene
etc.
About Global Sensor Technology
FAQs
1. Advantages of Optical Gas Imaging
Time-saving & Efficient: support large-scale real-time detection,
rapid leak location, no need for interrupting production.
Long Range Detection: away from dangerous and complex areas,
non-contact non-destructive testing, without additional radiation
source
Easy to Analyze: intuitive imaging, instant storage, convenient
analysis
Multi-function Inspection: a variety of gases can be detected, with
excellent remote temperature measurement function
2．Working Principle of Optical Gas Imaging
Optical gas imaging is a kind of infrared technology that could see
invisible industrial gases.
After absorbing infrared radiation at specific wavelengths,
infrared radiation difference will cause between the gas and the
background.
The gas leak detection infrared detector with built-in narrowband
filter only receives the infrared band near the gas infrared
absorption peak, and can convert the gas into visible infrared
images through the radiation difference between the gas and the
background.
