GST GAS330 for Gas Leak Detection
GST 320x256 / 30μm Cooled Infrared Camera Module for Non-contact
Gas Leakage Detection
Product Description
GAS330 is a cooled infrared thermal imaging module specially
designed for gas leakage detection. It can automatically detect gas leaks of many industrial gases in a few seconds accurately and safely without the need of shutting down any
systems.
GAS330 infrared gas leak detection camera uses 320x256 / 30μm
cooled MWIR infrared detector. It has an advantages of non-contact
measurement in dangerous areas or areas that are difficult to
access, so as to ensure the safety of inspection personnel.
By using this infrared thermal imaging technology in the
petrochemical industry, the safety production, environmental
protection supervision and cost saving can be ensured.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
Product Specifications
| Model | GAS330 |
| IR Detector Performance |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
Industrial Applications
The GAS330 gas leak detection thermal imaging camera is used for
visiualizing the invisible VOCs (volatile organic compounds) and
detecting gas leakage such as: Methane, Ethane, Propane, Butane,
Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene,
Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene
etc.
Praises from Customers
FAQs
1. What is a cryocooler used for?
Cryocoolers are machines that keep sensors extremely cold so that
thermal images can be taken on long-term missions. In many high-end
applications, the sensors that capture images require extremely low
temperatures.
2. What are the main factors to measure the quality of Cryocooler?
Long battery life and reliable operation are main factors to
measure the quality of a cryocooler. GSTiR cryocooler has a wide
operating temperature range and excellent reliability. Its MTTF
(Mean Time to Failures) has reached to 10,000 hours, which meets
24*7 boot operation requirements.
3. What is MTTF?
MTTF (Mean Time to Failure) measures a part’s reliability. It shows
you how long on average a part lasts before it breaks and you have
to replace it. On a basic level, it tells you about the quality of
the parts you’re buying. The longer they last, the more value
you’re getting from them.
