320x256 30μM MWIR Cooled Thermal Imagin Sensor For Visualizing Gas
Leaks
Product Description
C330M-G cooled infrared detector is specially developed for VOCs
gas leak detection with the function of converting infrared
radiation of target with 3.2~3.5μm wavelength into electrical
signal. Its external mechanical interface, optical interface and
electronic interface are commonly used and can be expanded. C330M-G
can be widely used in atmospheric environment monitoring and gas
leakage detection, pollutant discharge, chemical gas detection in
petrochemical plants and refineries.
Main Features
Optical Gas Imaging
• Long range non-contact detection
• High efficient, secure and wide range of gas leak detection
High Sensitivity
• High sensitive cooled infrared detector, quite efficient in
application of low gas concentration and slow gas flow
• Effective leak detection includes Alkanes, Alkenes, Alcohols,
Benzenes, Ketones and other gases
Designed for Requirements of Users
• Support 12V power supply for explosion-proof certification
• Various cryocoolers available for light weight, low power, long
life and high reliability
• Customizable spectral range: 3μm~5μm MWIR (for more gas detection
types: CO, CO2 etc.)
Product Specifications
| Model | C330M-G |
| Sensitive Material | HgCdTe/MCT |
| Resolution | 320×256 |
| Pixel Size | 30μm |
| Spectral Range | 3.2μm±0.1μm～3.5μm±0.1μm (Cusomizable Range: 3μm~5μm) |
| Working Mode | Snapshot; ITR Integration Mode; Windows Mode; Anti-blooming |
| Charge Capacity | 36Me-/12Me- |
| Dynamic Range | ≥80dB |
| Number of Output | 1 or 4; Up to 6.6MHz/per Output |
| Typical NETD | 10mK (F1.5) |
| Effective Pixel Rate | ≥99.5% |
| Response Non-uniformity | ≤8% |
| Cryocooler | RS058 | RS058I | LS734 |
| Cooler Type | Integral Rotary Stirling Cooler | Integral Rotary Stirling Cooler | Linear Rotary Stirling Cooler |
| Stable Power Consumption | ≤7W | ≤7W | ≤10W |
| Max. Power Consumption | ≤15W | ≤15W | ≤45W |
| Power Supply | 24V DC | 12V DC | 24V DC |
| Cooling Time | ≤6min30s | ≤7min | ≤5min |
| Size (mm) | 142x58.5x71 | 142×58.5×71 | Compressor Φ46×122
Dewar Φ40×114 |
| Weight | ≤600g | ≤600g | ≤1.2kg |
| Working Temperature | -45°C ~ +71°C |
Industrial Applications
The C330M-G gas leak detection cooled MWIR thermal imaging detector
is used for customers who have strong development ability. By
integrating this cooled thermal sensor, the invisible VOCs
(volatile organic compounds) can be detected and visualized so that
further damage can be avoided. These gases includes such as:
Methane, Ethane, Propane, Butane, Pentane, Hexane, Heptane, Octane,
Ethylene, Propylene, Isoprene, Methanol, Ethanol, Butanone,
Benzene, Toluene, Xylene, Ethylbenzene etc.
About Global Sensor Technology
1. What is thermal sensitivity?
Thermal Sensitivity, also named NETD (Noise Equivalent Temperature
Difference), is a key parameter for evaluating medium wave (MWIR)
and long wave (LWIR) thermal imaging cameras. It is directly
related to the clarity measured by the thermal imager. It is a
numerical value representing the signal-to-noise ratio of the
temperature difference and measured in milliKelvins (mK). The
smaller the thermal sensitivity value, the higher the sensitivity
and the clearer the image.
2. What are the applications of thermal imaging?
Temperature measurement and all-weather imaging are two basic
functions of infrared thermal imaging technology. Products
developed based on these two technologies are widely used in
security & monitoring, UAV payloads, industrial inspection,
firefighting, predictive maintenance, ADAS, epidemic prevention,
AIoT etc.
