TWIN612 Thermal Imaging Module
SWaP-C LWIR 640x512 12μm Thermal Camera Module for Drones
Product Description
The iTL612R infrared camera core integrates 640x512 / 12μm wafer
level package (WLP) infrared thermal detector. It is an uncooled
LWIR radiometric thermal imaging module for drones with spectral
range from 8 to 14μm.
iTL612 thermal camera module features in sharp and crisp image
presentation, compact size and low cost. Oriented for fully
optimized SWaP, iTL612R uncooled thermal module provides a reliable
solution for infrared system integration with limited space. Its
compact structure has reached top level of the same specification
module. It also has an optional thermographic function with
measurement range from -20℃~550 ℃ for industrial temperature
measurement.
The iTL612 thermal module is specially developed for the field of
Predictive Maintenance, Photovoltaic Inspection, Environmental
Protection, Scientific Research, Aerial Photography, Police
Investigation, Relief & Rescue, Forest Fire Prevention, Urban
Safety etc.
Main Features
Compact & Lightweight Design
• Size: 21mm×22.3mm×27.3mm (with 9.1mm lens)
• Weight: 20.8g±1.5g (with 9.1mm lens)
• Low power consumption as low as 0.7W
Clear Image & Accurate Radiometry
• Brand new image process algorithm: NUC/3DNR/DNS/DRC/EE
• Support Windows/Linux/ARM SDK
• Support regional, point & isotherm temperature measurement
Various Interfaces for Easy Integration
• DVP/LVDS/USB2.0 interfaces, RAW/YUV image data output, serial
port control
Product Specifications
| Model | iTL612/R |
| IR Detector Performance |
| Sensitive Material | Vanadium Oxide |
| Resolution | 640×512 |
| Pixel Size | 12μm |
| Spectral Range | 8~14μm |
| Typical NETD | ≤40mk |
| Image Processing |
| Frame Rate | 30Hz |
| Start-up Time | 5s |
| Digital Video | RAW/YUV/BT656 |
| Image Algorithm | Non-uniformity Correction (NUC)
3D Noise Reduction (3DNR)
De-noise (DNS)
Dynamic Range Compression (DRC)
Edge Enhancement (EE) |
| Image Display | Black Hot/White Hot/Pseudo Color |
| PC Software |
| ICC Software | Module Control & Video Display |
| Electrical Specifications |
| Standard External Interface | 30Pin_HRS: DF40C-30DP-0.4V(51), (HRS, Male) |
| USB Expansion Board | Type-C |
| Communication Interface | RS232-TTL/USB2.0 |
| Digital Video Interface | CMOS8/USB2.0 |
| Supply Voltage | 3.3V±0.1V VDC |
| Typical Power Consumption | 0.7W |
| Temperature Measurement |
| Operating Temperature Range | -10°C~+50°C |
| Temperature Measurement Range | -20°C~+150°C, 0°C~550°C; Support Customization and Expansion |
| Temperature Measurement Accuracy | Greater of ±3°C or ±3% (@23℃±3℃) |
| Regional Temperature Measurement | Support Maximum, Minimum and Average Value of the Output Regional
Temperature |
| SDK | Support Windows/Linux/ARM; Achieve Video Stream Analysis and
Conversion from Gray to Temperature |
| Physical Characteristics |
| Size (mm) | 21×22.3×27.3 (With 9.1mm Lens) |
| Weight | 20.8g±1.5g (With 9.1mm Lens) |
| Environmental Adaptability |
| Operating Temperature | -40°C~+70°C |
| Storage Temperature | -45°C~+85°C |
| Humidity | 5%~95%, Non-condensing |
| Vibration | 5.35grms, 3 Axis |
| Shock | Half-sine Wave, 40g/11ms, 3 Axis 6 Direction |
| Certificates | ROHS2.0/REACH |
| Optics |
| Optional Lens | Fixed Focus Athermal: 9.1mm |
Industrial Applications
The iTL612/R thermal imaging module can be integrated into UAV
payloads and wearable devices so that is widely used in fields of Predictive Maintenance, Photovoltaic Inspection, Environmental
Protection, Scientific Research, Aerial Photography, Police
Investigation, Relief & Rescue, Forest Fire Prevention, Urban
Safety etc.
Our Team
FAQs
1.What is infrared detector / thermal imaging sensor?
Infrared waves cannot be seen with the human eye. Infrared detector
/ thermal imaging sensor is an optical-electrical device to react
to infrared radiation and thermal energy and convert it into
electrical signal and then output visible thermal images.
2.What is WLP?
WLP refers to wafer level package. It is the process of completing
high vacuum packaging directly on the entire MEMS wafer, then
scribing and cutting to make a single infrared sensor. Together
with metal package, ceramic package, they are the 3 main package
formats of uncooled infrared detectors.
3. What's the advantage of WLP?
WLP IR detectors are specially designed to meet the miniaturization
and low cost requirement in the application of infrared technology
to consumer electronics market. Global Sensor Technology, with
volume fabrication capability, is now offering a variety of WLP
infrared module solutions to boost more new applications of
emerging markets.
