Small Size Long Wave Thermal Imaging Core 400x300 COIN417G2
Thermal Camera Core
Uncooled FPA Thermal Imaging Camera Core with 400x300 Infrared
Detector
Product Description
COIN417G2 uncooled infrared module is a new generation version of
COIN417 developed by Global Sensor Technology (GST). It integrates
400x300@17μm wafer level package (WLP) infrared imaging detector,
high performance signal processing circuit and image processing
algorithm such as Non-uniformity Correction (NUC), 3D Noise
Reduction (3DNR), 2D Noise Reduction (DNS), Dynamic Range
Compression (DRC), Edge Enhancement (EE).
The COIN417G2 infrared module features in sharp and crisp thermal
image presentation, compact size and low cost. It also has an
optional thermographic function with measurement range from
-20℃~550 ℃ for industrial temperature measurement.
The COIN417G2 thermal module be used in Thermography, Security
Monitoring, Firefighting & Rescue, Outdoors, AIoT, Smart Hardware,
UAVs Payload, ADAS etc.
Global Sensor Technology is a supplier of cooled uncooled infrared
detectors and infrared thermal imaging modules. These infrared FPA
detectors and thermal camera cores are partial components of
infrared thermal cameras, which are specially used for the
secondary development requirements of the customers.
Main Features
Excellent Image Performance
• Powerful image process algorithm: NUC/3DNR/DNS/DRC/EE
• Present sharper and clearer image quality
Temperature Measurement
• With range of 20℃～150℃, 0~550℃
• Support customization & expansion
Higher Efficiency
• With start-up time at 3s and power consumption as low as 0.7w
Faster Integration
• Support DVP/LVDS image output interface, RAW/YUV digital video
output, serial port control
Product Specifications
| Model | COIN417G2/R |
| IR Detector Performance |
| Material | VOx |
| Resolution | 400×300 |
| Pixel Pitch | 17μm |
| Spectral Range | 8μm ~14μm |
| Typical NETD | ≤40mK |
| Image Processing |
| Frame Rate | 50Hz/30Hz/25Hz |
| Start-up Time | 3s |
| Analog Video | PAL/NTSC |
| Digital Video | RAW/YUV/BT656 |
| Image Algorithm | Non-uniformity Correction (NUC)
3D Noise Reduction (3DNR)
2D Noise Reduction (DNS)
Dynamic Range Compression (DRC)
Edge Enhancement (EE) |
| Digital Zoom | 1X~8X Continuous Zoom, 1/8 Step Size (YUV Output) |
| Image Display | Black Hot/White Hot/Pseudo Color |
| PC Software |
| ICC Software | Module Control and Video Display |
| Electrical Specification |
| Standard External Interface | 50Pin_HRS: DF40C-50DP-0.4V(51), (HRS, Male) |
| USB Extension Board | Type-C |
| Communication Interface | TTL-232/USB2.0 |
| Digital Video Interface | CMOS8/CMOS16/LVDS/USB2.0 |
| Supply Voltage | 4~5.5V |
| Typical Power Consumption | 0.7W |
| Temperature Measurement |
| Operating Temperature Range | -10℃~+50℃ |
| Temperature Measurement Range | -20℃~150℃, 0℃~550℃; Support Customization and Expansion |
| Temperature Measurement Accuracy | Greater of ±3℃ or ±3% |
| Regional Temperature Measurement | Support Maximum, Minimum and Average Value of the Output Regional
Temperature |
| SDK | Windows/Linux/ARM; Achieve Video Stream Analysis and Conversion
from Gray to Temperature |
| Physical Characteristics |
| Size (mm) | 25.4×25.4×29.3(With 9.1mm Lens)
25.4×25.4×41.2(With 13mm Lens)
25.4×25.4×40(With 19mm Lens) |
| Weight | 29g±3g(With 9.1mm Lens)
42g±3g(With 13mm Lens)
44g±3g(With 19mm Lens) |
| Environmental Adaptability |
| Operating Temperature | -40℃～+70℃ |
| Storage Temperature | -45℃～+85℃ |
| Humidity | 5%~95%, non-condensing |
| Vibration | 5.35grms, 3-axis |
| Shock | Half Sine Wave, 40g/11ms, 3-axis, 6-direction |
| Certificates | ROHS2.0/REACH |
| Optics |
| Optional Lens | Fixed Athermal: 9.1mm/13mm/19mm |
| Protection Level | IP67 |
Thermal Camera Module for Security
Our Advantages
FAQs
1. What is infrared thermography?
Thermography is a new and effective technology of non-invasive
diagnostic method based on object surface temperature detection.
The infrared (IR) radiation emitted from an object is recorded and
visualized in the form of a temperature distribution map.
2. What can the infrared thermography be used for?
The infrared thermal image can be used to perform home inspections,
determine structural defects, electrical faults, mechanical faults,
physiological changes in people & animals and much more.
3. What are the advantages of infrared thermography?
For the non-destructive test, it is simple to test and quick to
response without damage, which results in saving costs, increasing
work efficiency, reducing manpower and equipment depreciation.
For the medical thermography, it is very efficient to find the
hidden problems in human body, 100% safe without radiation and
pain, which is an ideal tool for early health screening.
