Gas Leak Detection Camera
GST GAS330 Gas Leakage Detector Camera with 320x256 / 30μm Cooled
Infrared Detector
Product Description
GAS330 infrared gas leak detection camera is specific for detecting
minute fugitive emissions of industrial gases. With a customized
320x256 / 30µm cooled infrared detector, it works in the spectral
range of 3.2~3.5µm for VOCs leak detection.
Its real time non-contact measurement is helpful for inspectors to
detect the gas leakage in dangerous areas or areas that are
difficult to access, so as to ensure the safety of inspection
personnel. It has great application value in safety production,
environmental protection supervision and cost saving.
Main Features
- Resolution: 320x256
- Pixel Pitch: 30µm
- NETD≤15mK, High Sensitivity
- Spectral Response: 3.2µm±0.1µm~3.5µm±0.1µm
- Wavelength Customizable Based on Different Requirements
- Integrate with DVP/CameraLink Interface Easily
Product Specifications
| Model | GAS330 |
| IR Detector Performance |
| Resolution | 320x256 |
| Pixel Pitch | 30μm |
| Cryocooler | RS058 |
| Spectral Range | 3.2μm±0.1μm~3.5μm±0.1μm MW |
| Cooling Time (20°C) | ≤8min |
| NETD (20°C) | ≤15mK |
| Image Processing |
| Frame Rate | 30Hz |
| Dimming Mode | Linear/Histogram/Mixed |
| Digital Zoom | ×1/×2/×4 |
| Image Direction | Horizontally/Vertically/Diagonally Flip |
| Image Algorithm | NUC/AGC/IDE |
| Electrical Specification |
| Standard External Interface | J30JZ 25pin |
| Analog Video | PAL |
| Digital Video | 16bit RAW/YUV: 16bit DVP/Cameralink Output |
| External Sync | Frame External Sync: RS422 Level |
| Communication | RS422, 115200bps |
| Power Supply | 20~28VDC |
| Stable Power Consumption | 12W |
| Dimension (mm) | 155×67×80 |
| Weight | ≤900g |
| Operation Temperature | -40°C ~ +60°C |
| Vibration Magnitude | Vibration: GJB Vehicle-mounted High Speed Transport
Shock: Half-sine Wave, 40g 11 ms, 3 Axis 6 Direction 3 Times Each |
| Optical Lens |
| Optional Lens | Fixed Zoom: 23mm/F1.5; 55mm/F1.5 |
Industrial Applications
The GAS330 gas leak detection thermal imaging camera is used for
visiualizing the invisible VOCs (volatile organic compounds) and
detecting gas leakage such as: Methane, Ethane, Propane, Butane,
Pentane, Hexane, Heptane, Octane, Ethylene, Propylene, Isoprene,
Methanol, Ethanol, Butanone, Benzene, Toluene, Xylene, Ethylbenzene
etc.
Praises from Customers
FAQs
1. What is MCT/HgCdTe detector?
MCT, also called HgCdTe, refers to Mercury-Cadmium-Tellurid which
is a chemical compound of cadmium telluride (CdTe) and mercury
telluride (HgTe) and a common material in photodetectors. MCT/
HgCdTe detector is a photoconductive detector that operates at a
cryogenic environment and can detect infrared radiation. It is more
sensitive than the thermal sensors.
2. What is T2SL detector?
T2SL refers to Type-II Superlattice, which is an artificial
material with alternating growth periodic heterojunction at
nanometer size. It has high uniformity and superior optical
property, such as large electron effective mass,large absorption
coefficient and high quantum efficiency. Compared with MCT infrared
detector, the T2SL infrared detector has good material uniformity,
low cost, and similar performance to MCT infrared detector in
medium and long wave band, but has great advantages in very long
wave band.
