Brief Introduction
384x288 / 17μm N-Driver384 Vehicle Mounted Night Vision Infrared
Camera for Safe Driving
Product Description
N-Driver384 vehicle-mounted infrared module is specially oriented
for drivers' safe driving in harsh environment such as total
darkness, rain, snow, fog, dust etc. It carries the uncooled LWIR
infrared detector with a resolution of 384x288 and a pixel size at
17μm.
Drivers can see clear thermal image 300 meters away beyond the
reach of vehicles' headlights and will not worry about the
interference of high beams from oncoming vehicles by installing
this infrared camera module.
The N-Driver384 infrared camera module has a broad application
prospect in the fields of automatic driving, vehicle assisted
driving (ADAS) and special vehicle applications.
Main Features
- Resolution: 384x288
- Pixel Pitch: 17μm
- NETD<50mk
- A Great Distance of View
- All-weather Application
- High Speed Data Transmission
- High Reliability & Stability
Product Specifications
| Model | N-Driver 384 |
| IR Detector Performance |
| Resolution | 384x288 |
| Pixel Pitch | 17μm |
| Spectral Range | 8~14μm |
| NETD | <50mk |
| Image Display Performance |
| Focal Length | 9.7mm |
| Field of View | 37°×28° |
| Video Output Format | CVBS |
| Output Image Frame Rate & Resolution | PAL 768x576@25Hz |
| System Features |
| Start-up Time | ≤8s (Room Temperature) |
| Heater | When the Window Temperature is Lower than 2°C±2°C, Start Heating by
Itself
When the Window Temperature is Higher than 7°C±2°C, Turn off the
Heating by Itself |
| Compensation Algorithm | Automatic Shutter Compensation |
| Image Algorithm | Automatic Brightness Contrast/Image Enhancement |
| Communication Interface | RS232, Baud Rate: 115200bps/CAN Communication, Speed 500kbps |
| Pedestrian/Vehicle Detection | / |
| Electrical Features |
| Supply Voltage | DC9V~32V |
| Overall Power Consumption | ≤3.5W@24V Power Supply, Window Heating is off
≤9W@24V Power Supply, Window Heating is on |
| Operating Range |
| Observe Range | Person: 1.8m×0.5m ≥150m
Car: 2.3m×2.3m ≥300m |
| Detect Range | / |
| External Cable Connection |
| Cable Length | 4m |
| Standard External Interface | Power Supply: DC5.5*2.1 Female Connector
Video: RCA Lotus Male Connector
Serial Port: SM 2.54-3P Male Connector (Pin) |
| Physical Characteristics |
| Dimension (mm) | 40.0x36.0x58.0 (Without Cable) |
| Weight | 150g±3g (Without Cable) |
| Environmental Adaptation |
| Operation Temperature | -40°C ~ +85°C |
| Storage Temperature | -45°C ~ +90°C |
| Environmental Test | Salt Spray: ISO16750-4; Harsh Level IV
Industrial Solvent: GB/T28046.5-2013 |
| Reliability Test | Vibration: ISO16750-3, Grade A
Flame Retardant: GB8410, Grade B
Stone Impact: ISO16750-3, Grade A
ESD: Contact Discharge ±8KV, Air Discharge ±15KV |
| Package | Sealed Case IP67 |
| Certification |
| EMC | EMC Test Certification (ISO10605, ISO11452-4, ISO11452-2,
ISO7637-2) |
Industrial Applications
The N-driver 384 automotive thermal imaging camera is widely used
in Advanced Driver Assistance System.
About GST Infrared
FAQs
1. What is the difference between low light, active IR and thermal
imaging?
Low light needs natural light and transforms weak natural light
image into enhanced electronic image through image intensifier;
Active IR actively emits infrared light and uses infrared beam
reflected by the target. It has very poor concealment;
Thermal imaging doesn’t need any light and is a passive infrared
night vision that detects infrared radiation difference between
targets and scene or different parts of an object. not be affected
by the changes of the surrounding lighting conditions, during night
or even in fog, rain and other harsh environments.
2. Can you block thermal imaging?
In most cases, you cannot. But infrared rays can't penetrate walls,
and also the glass can block IR. So, if you don’t want to be
detected, you can conceal behind glass or walls to block the
thermal imaging.
